LSM TyreGuard® Tyre Monitoring Systems

Features+ Applications

LSM TyreGuard® TMSystems are designed for heavy-duty use and suit any vehicle in any industry that has a pneumatic tyre- some of LSM TyreGuard® TMSystems features are: 

 Applications.

• Mining, Quarry Earthmoving
• On and Off Road Heavy Haulage Trucks and Trailers, Low loaders.
• Agricultural vehicles including Irrigation, central / lateral moves.
• Mobile Cranes, EWP's.
• Emergency and Defence Vehicles.
• Forklifts and Port Equipment.
• Even passenger vehicles, lawn mowers and much more!

Safety + Equipment Damage Control.

• Peace of mind knowing that your tyres, your only contact with the road, are inflated properly for optimum performance and handling.
• Monitor displays current tyre pressures for all tyres.
• Tyre pressure is constantly monitored, while moving or parked.
• Alerts to dangerous low-pressure and high temperature situations, with both a visual and an audible alert.

Economy + Productivity + Environment:

• Properly inflated tyres last longer.
• The life of your tyre is extended due to less tread wear.
• Properly inflated tyres save fuel.
• Proper inflation protects and saves the tyre casing, reducing the chance of blowouts and side wall rips.
• Properly inflated tyres extend the life of tyre treads by as much as 35%.
• Properly inflated and maintained tyres save costly roadside repairs and down- time.
• Under inflated tyres wear prematurely, adding to the landfill/disposal problem.
• Assists in preventing dangerous debris on the road from worn and unsafe tyres and casings.
• Reduced rubber particulates in the air effecting air quality.

Benefits

LSM TyreGuard® TMSystems prevent accidents and reduce vehicle operating costs:

• Tyre Service Life / Fuel Economy: Maintaining optimum set- point pressures means tyres / tread last longer and fuel consumption is reduced.
• Increased Safety: Avoids tyre fires (locked brakes, bearing failures, tyre under-inflation), tyre explosions (pyrolysis) and resulting accidents.
• Braking / Traction / Control: Correct tyre inflation maximises vehicle control and braking in both dry and wet conditions.
• Equipment Damage Control: Catastrophic tyre failure, roll-overs, wheel- offs.
• Cost downs / Productivity / Tyre Checks: Targeting tyres that require re-pressurisation saves on labour and associated productivity loss. Consider 2,000 tyres in a fleet, with 2-3 minutes- checking tyres once a week would require 60- 100 hours to complete! 
• Environment: Reducing waste / landfill, decreased Co2 footprint, and reduces airborne rubber particulates affecting air quality.

Telematics Integration:  Integration to LSM FSM® Fleet Safety Manager Telematics provides live monitoring, data collection, alerting and reporting is provided when issues occur. With automatic reporting, a Fleet Operator can provide its clients with compliance reports, automatically or with a push of a button. Do the maths on time required to check and report on a fleet of 2,000 tyres! In Mining applications such as with DTrucks, Lightning Storms / Strikes can cause extensive loss of production. With LSM FSM® Fleet Safety Manager / TyreGuard® TMSystems, one can monitor if there are issues and safely go back into Production quicker.

How it Works

TyreGuard® HD360™ / HDJ360™ Rigid Vehicles / Single Tow

LSM TyreGuard® HD360™ (Trucks)  / HDJ360™ (Bus / Coach) TMSystems are designed to handle the rigours of harsh environments and is used primarily with standard Wheels that have Standard Bore Valves and are an excellent solution for such vehicles such as:

• Semi- trailer with a single (married) Trailer.
• Rigid Trucks + Trailer Fleets.
• Pimemovers + Single Tow (eg married Trailer).
• Cranes, Emergency Vehicles.
• Waste and Cement Trucks.
• Buses and Coaches
• Port Equipment.
• Forklifts / Telehandlers.
• EWP's especially on Trucks.
• Mobile and Pick / Carry Cranes. 
• Municipal Vehicles - Sweepers, Waster, etc.
• Distribution Trucks.
• Light Vehicles.

TyreGuard® MTR360® Multi- Tow Combination Trucks & Trailers / Low Loaders

The LSM MTR360® Truck + Multi- Tow Combination TMSystems is a unique World first, designed to monitor / report live Tyre Pressures + Temperatures for On and Off Road Transport Road Trains and Low Loaders.

Typical applications are:

• On- Road Transport Road Trains- Primemovers and multiple (up to x 8)  Trailers / Dollies.
• Off- Road Transport Rigs of the same for Heavy Haulage.
• Low Loader Rigs with up to 180 tyres.

Special characteristics, features and advantages of the TyreGuard® MTR360 TMSystem are:

• The In-Cabin Monitor will provide the Operator with the exact position and problem (pressure / temperature) Tyre on the retrospective Axle of the 8 x Tow Assets and Primemover.
• Alerts and warnings are both Static and Dynamic and great to know before you hit the road and whilst you are on the road! 
• Saves time by targeting those tyres with issues during Prestarts and Tyre / Wheel Maintenance.
• Full "Drop and Hook" is provided where each Tow Asset is "hooked" up (and when "dropped"), the sequential order is always seen / kept on the In- Cabin Monitor.

How it works?

• A TyreGuard® Transceiver is installed on each Tow Asset and its Wireless Tyre Sensors (up to 20 x tyres / asset) are programmed  / mapped to the Transceiver.
• Each TyreGuard® Transceiver relays its Tyre Sensor data in a "daisy- chain" process to the TyreGuard® MTR360 Hub located in the Primemover where the Tyre data can be viewed by the Operator on the In-Cabin Monitor.
• Tyre Sensors are easily programmed and can be viewed during walk- around inspections of the Rig. The TyreGuard® SmartLink Tool can read each Asset and all its Tyre Sensors in one pass.

In addition, the TyreGuard® MTR360 TMSystem is integrated into our FSM® Fleet Safety Manager Telematics for back to base alerting and reporting. 

TyreGuard® RV360® Recreational Vehicles

LSM Technologies even offer our Industrial grade TMSystems for Recreational Vehicles such as 4 x 4, Caravans, Campervan and RV's or even your own domestic car.

LSM TyreGuard® RV360 TMSystem Recreation Vehicles provides the same robust / heavy-duty design for protection of your personal vehicles.

The TyreGuard® RV360® TMSystem for Recreational Vehicles is: 

• Endorsed & Tested for >10 years: Our TyreGuard® RV360 is the only TMSystems in Australia tested and endorsed by Australia's top 4 x 4 Journalist Alan Whiting (Outback Travelling Australia) and legendary V8 Supercar Driver Larry Perkins. 
• Provides Extended Warranties: We provide a 2 x year unconditional full replacement warranty and 5 x years (pro rata).
• Primary + Secondary Tow: You can simply program the Tyre Sensors separately to your Car / 4 x 4 and the Display Monitor will show the 2 x vehicles on its screen.
• Van / Trailer "Drop and Hook": If you disconnect your Tow to use your Car separately, the TyreGuard® RV360 will ask if you would like to stop monitoring its Sensors. Later when you come within range of your Tow again it will ask if you would like to add the tow back again.
• Fully Potted Tyre Sensors: TyreGuard® Tyre Sensors are fully potted / encapsulated in hardened poly material. Tyre Sensors are subjected to enormous stresses on the wheel with water ingress, impacting of debris / rocks, severe road vibration, extremes of temperatures and high centrifugal forces. Tyre Sensors that can be opened to have their battery replaced will be surely compromised under such conditions.
• Global Baseline Reset Function: This feature allows you to globally resetting of the base - line / set - point pressure alarms when raising and lowering tyre pressures to accommodate "sand or corrugated" road conditions.

If you want to purchase online-  see our Shop

TyreGuard® SmartLink® Tool / Tablet

LSM Technologies TyreGuard® SmartLink® Tool / Tablet  now brings a new dimension to managing Pneumatic Tyres and your TyreGuard® TMSystems.

TyreGuard® SmartLink® Tablet adds to our technology portfolio with an Off- line Tool for Manual Inspections, Programming, Maintenance and Off- line Storage / Analysis of Tyre Pressure and Temperature (and Tyre Depth) Data especially where telemetry is not available.

TyreGuard® SmartLink® Tablet is used to communicate with all our Tyre Monitoring Systems with RF or LF Sensor / Transceivers used on tyres of Truck and Trailer Fleets, OFF Road Equipment and Multi-­Trailer applications. It can be used to set up the Transceiver configuration and attain information on Tyre status via walk- around pre- starts / inspections.

TyreGuard® SmartLink® Tablet has many features- including:

• It is fit- for- purpose and robust in design.
• Quickly program Tyre Sensors for a complete Vehicle.
• Can quickly and easily re- program new Sensors.
• Workshop can determine  / target what Tyres require attention.
• Download, Store and Analysis Pressure, Temperature Data, Tyre Depth and also Photos during maintenance inspections. 
• Complete Truck / Trailer Tyre walk- round checks even whilst sitting in your service vehicle- out of the rain and dust.
• Simply point and read each Asset.
• Can connect with a PC to download the saved data for documentation and analysis.

FSM® Telematics Integration

FSM® FLEET SAFETY + TRACKING MANAGER 

LSM TyreGuard® Tyre Monitoring Systems works hand in hand with LSM FSM® Fleet Safety Manager + Tracking Telematics System to provide real time data and alerts back to base, ensuring a proactive approach to enhance Workplace (and public) OH&S, Equipment Damage Control, Maintenance Cost-downs and Productivity. 

LSM FSM® is an in- house world first and Australian designed / developed SaaS software that allows users to be provided with more than just fleet tracking but also integration of LSM product technologies, that can be accessed via any internet connected PC or mobile device. LSM FSM® is an intuitive web browser interface with a single click access to fleet dashboards, customise reports, compliance tools as well as real time, user defined alerts. It is scalable from a single vehicle / asset up to thousands, providing immediate alerts as required via SMS and email, anywhere in the world- 24/7.

Australian designed and made- for Australian Industry.